Adafruit SHARP Memory Display Breakout - 1.3" 168x144 Monochrome
Product ID: 3502
The 1.3" 168x144 SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For dark/night reading you...
$24.95
In stock
Adafruit EYESPI Breakout Board - 18 Pin FPC Connector
Product ID: 5613
Our most recent display breakouts have come with a new feature: an 18-pin "EYE SPI" standard FPC connector with flip-top connector. This is intended to be a sort-of "STEMMA QT for displays" - a way to quickly connect and extend display wiring that uses a lot of SPI pins. In this case we need a lot of SPI pins, and we want to be able to use long distances so we go...
$1.95
42 in stock
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731 - STEMMA QT / Qwiic
Product ID: 2946
The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! This I2C LED driver chip has the ability to PWM each individual LED in a 16x9 grid so you can have beautiful LED lighting effects, without a lot of pin twiddling. Simply tell the chip which LED on the grid you want lit, and what brightness and it's all taken care of for you....
$5.95
In stock
Adafruit DVI Sock for Pico - Works with HDMI Displays
Product ID: 5957
Wouldn't it be cool to display images and graphics directly from your Pico or Pico W to an HDMI monitor or television? We think so! So we designed this DVI Sock with a digital video output (a.k.a DVI) that will work with any HDMI monitor or display. Note it doesn't do audio, just graphics! We designed this little breakout board after seeing Wren6991's Pico DVI Sock...
$2.95
In stock
Adafruit DVI Breakout Board - For HDMI Source Devices
Product ID: 4984
We designed this little breakout board after seeing some cool demos for the Raspberry Pi Pico driving an HDMI display. By using some fun 'abuse' of overclocking and the RP2040's PIO system a low-cost microcontroller can have great looking video output. Great for making demos, or just noodling around with digital video generation. This breakout board has no active...
$1.95
68 in stock
Adafruit 1.14" 240x135 Color TFT Display + MicroSD Card Breakout - ST7789
Product ID: 4383
Say hello to our 1.14" 240x135 Color TFT Display w/ MicroSD Card Breakout – we think it's T-F-Terrific! It's the size of your thumbnail, with glorious 240x135 high res pixel color. This very very small display is only 1.14" diagonal, packed with RGB pixels, for making very small high-density displays. We've been looking for a display like this for a long time -...
$9.95
In stock
LED Charlieplexed Matrix - 9x16 LEDs - Red
Product ID: 2947
These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Red version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython support,...
$7.50
62 in stock
Adafruit EYESPI BFF for QT Py or Xiao - 18 Pin FPC Connector
Product ID: 5772
Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to add a small, colorful, and bright display to any project. Our most recent display breakouts have come with a new feature: an 18-pin "EYE SPI" standard FPC connector with flip-top connector. This is intended to be a sort-of "STEMMA...
$3.95
In stock
Adafruit IS31FL3741 13x9 PWM RGB LED Matrix Driver - STEMMA QT / Qwiic
Product ID: 5201
Add a splash of RGB LEDs to a project you're working on, with this adorable 13x9 RGB LED matrix breakout. It features -- no surprise -- 117 RGB LEDs, each one 2x2mm in size, in a 13x9 grid with 3mm pitch spacing. Unlike our 8x8 dotstar grid here, these are not NeoPixel or DotStar or other 'smart' RGB LEDs. Instead of having a lil chip in each LED, there's one large...
$14.95
74 in stock
Adafruit 0.96" 160x80 Color TFT Display w/ MicroSD Card Breakout - ST7735
Product ID: 3533
Say hello to our 0.96" 160x80 Color TFT Display w/ MicroSD Card Breakout – we think it's T-F-Terrific! It's the size of your thumbnail, with glorious 160x80 pixel color. This very very small display is only 0.96" diagonal, packed with RGB pixels, for making very small high-density displays. This lovely little display breakout is a great way to add a small,...
$7.95
100 in stock
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing Yellow
Product ID: 3135
You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...
$10.95
56 in stock
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Red
Product ID: 3134
You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...
$9.95
68 in stock
LED Charlieplexed Matrix - 9x16 LEDs - Blue
Product ID: 2973
These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Blue version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython support,...
$6.95
37 in stock
LED Charlieplexed Matrix - 9x16 LEDs - Yellow
Product ID: 2948
These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Yellow version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython support,...
$6.95
44 in stock
Adafruit EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT
Product ID: 5783
Raspberry Pi's make for handy lil computers, but they're really wonderful when you can connect all sorts of nifty hardware to them: color TFT or E-Ink displays, and sensors are our go-to favorites. Even better is when we make it fast and effortless to wire these up. With this new EYESPI Pi Beret there's no more counting pins or noodling with a breakout board. This...
$4.95
In stock
LED Charlieplexed Matrix - 9x16 LEDs - Green
Product ID: 2972
These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Green version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython support,...
$7.95
25 in stock
Adafruit PiCowbell DVI Output for Pico - Works with HDMI Display
Product ID: 5745
Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell DVI Output for Pico is in stock and ready to display images and graphics from a microcontroller directly to an HDMI monitor or television! Note it doesn't do audio, just graphics. The PiCowbell DVI is the same size and shape as a Pico and is intended to socket...
$6.95
In stock
LED Charlieplexed Matrix - 9x16 LEDs - Warm White
Product ID: 3162
These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Warm White version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython...
$7.95
9 in stock
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Green
Product ID: 3136
You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...
$10.95
In stock
LED Charlieplexed Matrix - 9x16 LEDs - Cool White
Product ID: 2974
These are 9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. You don't get any resistors or driver chips with this grid, its just a mess of LEDs in a charlieplexed arrangement This is the Cool White version. Check out our other colors! Check out our detailed tutorial for Arduino & CircuitPython...
$7.95
85 in stock
Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Warm White
Product ID: 3163
You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in many vivid...
$12.95
18 in stock
Pimoroni Pico DV Demo Base - RP2040 DVI Multimedia Board - PIM588
Product ID: 5674
Intrigued by the possibilities of VGA Demo Base but no longer own a D-sub cable? No problem! This board is an all-digital conversion of Raspberry Pi's VGA reference design, great if you want to start hacking on video and/or audio output from a Raspberry Pi Pico and piping it straight into a modern monitor. The folks at Pimoroni been using this board with Wren6991's...
$24.95
28 in stock
Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Cool White
Product ID: 3138
You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...
$12.95
34 in stock
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Blue
Product ID: 3137
You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...
$10.95
18 in stock
Adafruit SHARP Memory Display Breakout - 2.7" 400x240 Monochrome
Product ID: 4694
The Adafruit 2.7" 400x240 SHARP Memory Display Breakout is a chonky cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a gray background, and the pixels show up as black-on-gray for a nice e-reader type display. It does not have a backlight, but it is daylight readable. For...
Notify Me, Adafruit SHARP Memory Display Breakout - 2.7" 400x240 Monochrome
$44.95
Out of stock
Notify Me, Adafruit SHARP Memory Display Breakout - 2.7" 400x240 Monochrome
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings
Product ID: 2965
You wont be able to look away from the mesmerizing patterns created by these Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings. These 15x7 LED displays can be paired with with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. They even come with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in...
More Info, Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings
In stock
More Info, Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings
Pimoroni Pico VGA Demo Base - RP2040 VGA Multimedia Board - PIM553
Product ID: 5675
Built especially to showcase the low-cost, feature-rich RP2040 chip on the Raspberry Pi Pico, this board has VGA output, an SD card slot, digital I2S audio output, and more! Based on the reference design by Raspberry Pi, our Pimoroni Pico VGA Demo Base is a great way to start experimenting with Raspberry Pi Pico/RP2040. It's the perfect way to demo some of the fun...
$24.95
2 in stock
Beam Pluggable LED Boards by Hover Labs
Product ID: 3668
Beam is a beginner-friendly PCB with 120 LEDs arranged in a 5x24 grid, a great size to display text or animations in your project. Plug in one to four to create a long blinky display that can be controlled by any 3-5V microcontroller or microcomputer (e.g. Arduino, Raspberry Pi, Particle, and more). The Beam boards communicate via I2C so you only need 2 pins! Build a...
More Info, Beam Pluggable LED Boards by Hover Labs
No longer stocked
More Info, Beam Pluggable LED Boards by Hover Labs